Forum Replies Created
-
AuthorPosts
-
in reply to: No password on web GUI #6601
Enterprise users often attach the management interface of SecAst to an IP on a management VLAN, and access to the management VLAN is restricted. So with this setup administrators don’t want another level of authentication – so we leave it off by default.
However, if you would like to enforce authentication on the SecAst web GUI, you can add a username and password using the steps outlined in section 2.3.5 of the installation guide (Secure the Web Interface). I’ll repeat the Linux command here to save you from digging out the manual:
htpasswd -c /usr/local/secast/web_interface/.htpasswd user1
The above line will create username ‘user1’ and then prompt for a password to be associated with the username. After that the web GUI will require authentication to view the web page.
in reply to: No password on web GUI #6598Enterprise users often attach the management interface of HAAst to an IP on a management VLAN. Access to this VLAN is restricted to administrators, so in this case they usually don’t want to authenticate again – and that’s the default.
However, if you would like access to the HAAst web GUI to force authentication, you can add security using the steps outlined in section 3.4.5 of the installation guide (Secure the Web Interface). I’ll repeat the Linux command here to save you from digging out the manual:
htpasswd -c /usr/local/haast/web_interface/.htpasswd user1
The above line will create username ‘user1’ and then prompt for a password to be associated with the username. To reset the password just repeat the process.
in reply to: Where can I find an installation manual #6597Look in the /docs folder of the package you downloaded. In there you will find a PDF document called Detailed_Installation_Guide.pdf which will take you through all of the steps involved in installation (getting the program installed), and key steps of configuration (making the program work the way you want).
-
AuthorPosts
