Home Forums SecAst (Security for Asterisk) General USB Dongle in VMware ESXi

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Customer Inquiry
    Participant
    Post count: 201

    I have received USB dongles (looks like regular USB keys) which hold my license. I have plugged them into the host but I’m not sure what do to next. I run VMware ESXi 6.7

    Telium Support Group
    Moderator
    Post count: 263

    Once you have received the USB dongle(s) containing your license,

    1. Plug each dongle into the appropriate physical machine. (The dongle will have a tag attached showing the machine name, in case you have multiple dongles).

    2. From the VMware console edit the virtual machine, and add a new USB device:
    ESXi step 1

    3. Select the device name which should be something similar to “Phillips Elite”, and click save. (On some occasions you have to shut down and restart the VM for the hardware to be added).
    ESXi step 2

    4. From the VM’s command line, confirm in Linux that the USB dongle is present using the “lsusb” command. Notice the Phillips (NXP) device is present – that is the USB dongle.
    ESXi step 3

    5. Telnet to the local HAAst/SecAst instance and issue the “license usbdongle” command and follow the steps presented on screen.

    • This reply was modified 4 years, 2 months ago by WebMaster.
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.