Home › Forums › SecAst (Security for Asterisk) › Configuration & Optimization › License violation but no calls in progress

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • teliumcustomer23
    Participant
    February 7, 2017 at 5:04 pm
    Post count: 1
    #6397

    So on my testing box (with the total of 4 users) for a call center I have the following in the secast log during the logrotate:


    Mon Feb 6 23:52:40 2017, 00000404, I, Logger, Log file rotation/truncation detected. New log file started
    Mon Feb 6 23:52:40 2017, 00001019, E, License, Violation detected. 8 lines in use exceeds license limit of 3 lines
    Mon Feb 6 23:52:40 2017, 00000126, W, Controller, Automatic shutdown request by module License
    Mon Feb 6 23:52:40 2017, 00002038, W, Controller, Stopping
    Mon Feb 6 23:52:40 2017, 00000107, I, General, SecAst state changing to not protecting
    Mon Feb 6 23:52:40 2017, 00001706, I, Database Controller, Database closed
    Mon Feb 6 23:52:40 2017, 00001713, E, Database Controller, Database command failed on write to eventlog table
    Mon Feb 6 23:52:40 2017, 00001705, I, Database Controller, Database open for archiving
    Mon Feb 6 23:52:41 2017, 00001259, I, Asterisk Controller, Stopped
    Mon Feb 6 23:52:41 2017, 00001303, I, Geo IP, Closed GeoIP database
    Mon Feb 6 23:52:41 2017, 00001602, I, Controller, Pipe server stopping
    Mon Feb 6 23:52:41 2017, 00000201, I, Controller, Telnet server stopping
    Mon Feb 6 23:52:41 2017, 00002832, I, Controller, Recovery state will no longer be automatically saved
    Mon Feb 6 23:52:42 2017, 00002824, I, Controller, Stopped
    Mon Feb 6 23:52:42 2017, 00000101, I, General, SecAst terminating with exit code 200 (license violation or error) after running for 2 days; 7 hours; 8 minutes; 21 seconds

    There’s no way that there are 8 simultaneous calls on that system at any time, as a matter of fact there were no calls active at all at the time in the log file.

    Sadly, when that happens, secast takes the astman/asterisk down with it, making the whole system inaccessible.

    How can I get secast to accurately determine the number of simultaneous active calls? If I can’t have it resolved, my out resort would be to disable/uninstall secast completely, after a long struggle with dependencies to run it on Ubuntu 14.04 LTS.

    Telium Support Group
    Moderator
    February 7, 2017 at 9:01 pm
    Post count: 263
    #6687

    The fact that the license violation occurs close to the time of a log rotation is a red herring (no relationship).

    SecAst does not track calls in progress; it asks Asterisk to report the number of calls in progress. You can perform the same query from the command line:

    asterisk -vx ‘core show calls’


    So the question is why is your Asterisk installation reporting 8 calls in progress. This can be due to:

    • Valid users making calls in or out
    • Valid user starting the conference feature
    • Incoming callers leaving a voicemail
    • Automated calls
    • Hackers calling in to probe your dialplan
    • Asterisk incorrectly not releasing channels
    • Dialplan errors

    If the number of calls reports higher than you expect, you can delve deeper into the calls in progress using a command like:

    asterisk -vx ‘core show channels’

    If you are using FreePBX then Sangoma recently started making automatic calls in the background to set ‘time condition’ variables. In essence FreepBX is making invisible calls, and Asterisk will report these as calls in progress; nothing we can do about it, and that won’t explain 8 calls in progress.

    So…in a nutshell SecAst does not count calls – it gets that number from Asterisk. Something else is going on with your Asterisk setup. Repeat the first command above once every 30 seconds and watch if your ‘calls processed’ count is increasing even when users aren’t making calls. That should help you figure out why Asterisk is reporting a count you don’t expect!

    And now the bad news…it sounds like you’re struggling with some basic Linux admin and Asterisk admin tasks. If this is a commercial installation I would recommend purchasing 2 hours of support so we can help you through setup. If this is a home installation you probably have a big learning curve ahead of you in terms of Ubuntu and Asterisk – I’m not sure if it’s worthwhile for you to continue but we can’t really offer free support for Asterisk (or Ubuntu). I’m not sure if you are using a configuration generator either (you don’t offer any details of your system), but if this is a commercial installation you may want to move up to a package like xCALLY which provides a very professional turnkey solution without many of the headaches involved with many smaller packages (you don’t need to know anything about Linux or Asterisk).

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The topic ‘License violation but no calls in progress’ is closed to new replies.